What to do if Worx Power Tool battery will not charge?
If your Worx Power Tool battery isn't charging, there are a couple of things to check: * First, make sure the charger is properly plugged into a working electrical outlet. * Second, the surrounding air temperature might be too hot or too cold. Try adjusting the temperature of the environment where you're charging the battery.
Why does my Worx Power Tool XTD Driver stop during use?
If your Worx Power Tool XTD Driver stops while you're using it, the battery may be out of power. Try recharging or replacing the XTD Driver battery.
How to fix a Worx Power Tool switch that cannot be pressed?
If the switch on your Worx Power Tool cannot be pressed, it might be because the Forward/Reverse switch is in the middle position. Adjust the Forward/Reverse switch to the correct position to resolve this.
General| Power source | Battery |
|---|---|
| Charging time | 5 h |
| Battery voltage | 4 V |
| Battery capacity | 1.5 Ah |
| Torque (max) | 3 N⋅m |
| Idle speed (max) | 230 RPM |
| Reverse | Yes |
| Handle shape | Pistol handle |
| Product type | Power screwdriver |
| Product color | Black, Orange, Silver |
| Chuck diameter | - |
| Adjustable speed | No |
Weight and Dimensions| Depth | 60 mm |
|---|---|
| Width | 160 mm |
| Height | 230 mm |
| Weight | 700 g |
Maintain a clean, well-lit workspace and prevent distractions or unauthorized access.
Ensure proper electrical connections, avoid wet conditions, and protect cords from damage.
Stay alert, use PPE, and prevent unintentional tool activation.
Use the correct tool for the job and ensure it is in good repair.
To Next Page
