Cordless rotary hammer
WX382 WX382.1
WX382.2 WX382.3
4
servicing or maintenance.
8. Always check walls and ceilings to avoid
hidden power cables and pipes.
9. After long working periods, external metal
parts and accessories could be hot.
10. Wear eye protection when operating this
tool.
11. Do not expose to rain or water.
12. Charger is for indoor use only.
13. Do not store the battery pack in
temperatures over 40
o
C.
14. Always charge the battery pack between
temperatures 0
o
C to 30
o
C. Ideal charging
temperature is 15
o
C-25
o
C.
15. Only use the charger and the battery pack
provided, no others.
16. Avoid short circuit of the battery pack
connections (screws & nails).
17. Do not incinerate or burn the battery pack,
it may explode.
18. Do not charge a damaged battery pack.
19. Replace any damaged supply cords on
your charger in an approved service centre.
Residual risks
Even when the power tool is used as
prescribed it is not possible to eliminate
all residual risk factors. The following
hazards may arise in connection with the
power tool’s construction and design:
Damage to lungs if an effective dust mask is
not worn.
Damage to hearing if effective hearing
protection is not worn.
Damages to health resulting from vibration
emission if the power tool is being used
over longer period of time or not adequately
managed and properly maintained.
Wear ear protectors. Exposure to noise can
cause hearing loss.
Use auxiliary handles if supplied with the tool.
Loss of control can cause personal injury.
Hold power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring or its own cord. Cutting
accessory contacting a “live” wire may
exposed metal parts of the power tool “live”
and shock the operator.
WARNING! This power tool produces
an electromagnetic field during
operation. This field may under some
circumstances interfere with active or passive
medical implants. To reduce the risk of serious
or fatal injury, we recommend persons with
medical implants to consult their physician
and the medical implant manufacturer before
operating this machine.