Worx WX800 User Manual

11
Lithium-Ion cordless angle grinder EN
SYMBOLS
To reduce the risk of injury, user must
read instruction manual
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Wear protective gloves.
Batteries may enter water cycle if
disposed improperly, which can be
hazardous for ecosystem. Do not dispose
of waste batteries as unsorted municipal
waste.
Do not burn
Make sure the battery is removed prior
to changing accessories
Li-I on
Li-Ion
Li-Ion battery. This product has been
marked with a symbol relating to
‘separate collection’ for all battery
packs and battery pack. It will then
be recycled or dismantled in order
to reduce the impact on the environ-
ment. Battery packs can be hazardous
for the environment and for human
health since they contain hazardous
substances.
COMPONENT LIST
1. AUXILIARY HANDLE
2. SPINDLE LOCK BUTTON
3. ON / OFF SWITCH
4. BATTERY PACK RELEASE BUTTON
5. BATTERY PACK *
6. WHEEL GUARD FOR GRINDING
7. DISC*
8. SPANNER
9. INNER FLANGE
10. OUTER FLANGE
11. CLAMP ADJUSTMENT NUT
12. SPINDLE
13. GUARD CLAMPING LEVER
14. WHEEL GUARD FOR CUTTING*
* Not all the accessories illustrated or
described are included in standard delivery.
TECHNICAL DATA
WX800 WX800.1 WX800.9
Charger Voltage 100-240V ~ 50/60Hz /
Rated voltage 20V Max**
No load Speed 8600/min
Disc Size 115mm
Disc bore 22mm
Spindle thread M14
Machine weight 1.8kg 1.54kg
**Voltage measured without workload. Initial
battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.

Worx WX800 Specifications

General

Spindle thread	M14
Idle speed (max)	8600 RPM
Grinding disc diameter	- mm
Input power	- W
Power source	Battery
Battery voltage	20 V
Soft grip	Yes
Product color	Black, Grey, Orange
Number of handle positions	2

Weight and Dimensions

Width	76 mm
Height	105 mm
Length	360 mm
Weight	1540 g