Worx WX800 User Manual

13
Lithium-Ion cordless angle grinder EN
6. When using a diamond disc it will become very
hot. If this happens you will see a full ring of
sparks around the rotating disc. Stop cutting and
allow to cool at no load speed for 2-3 minutes.
7. Always ensure the workpiece is firmly held or
clamped to prevent movement.
MAINTENANCE
Remove the battery before carrying out any
adjustment, servicing or maintenance.
There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth. Always
store your power tool in a dry place. Keep the motor
ventilation slots clean. Keep all working controls free
of dust. Occasionally you may see sparks through the
ventilation slots. This is normal and will not damage
your power tool.
TROUBLESHOOTING
Although your new angle grinder is really very
simple to operate, if you do experience problems,
please check the following:
1. If your grinder wheel wobbles or vibrates,
check that outer flange is tight; check that
the wheel is correctly located on the flange
plate.
2. If there is any evidence that the wheel is
damaged do not use as the damaged wheel
may disintegrate, remove it and replace
with a new wheel. Dispose of old wheels
sensibly.
3. If working on aluminum or a similar soft
alloy, the wheel will soon become clogged
and will not grind effectively.
ENVIRONMENTAL PROTECTION
Disposal
The machine, its accessories and
packaging materials should be sorted for
environmentally friendly recycling.
The plastic components are labeled for categorized
recycling.

Worx WX800 Specifications

General

Spindle thread	M14
Idle speed (max)	8600 RPM
Grinding disc diameter	- mm
Input power	- W
Power source	Battery
Battery voltage	20 V
Soft grip	Yes
Product color	Black, Grey, Orange
Number of handle positions	2

Weight and Dimensions

Width	76 mm
Height	105 mm
Length	360 mm
Weight	1540 g