DRINK10 Distiller Operation Manual
REV-A Page 5 of 26
For avoiding leaking, please press the cover, and make sure the cover connects with
the body completely.
Do not drink pure water in the first bucket. Perhaps, it has the impurity of producing
process or packaging process.
Do not open the cover while working, because you may hurt by water vapor.
Minors are forbidden using!
2.3 Safety Parts
Heating Protect
KSD301
Temperature Controller
170 degree C automatic reset. Protecting Electric heating rings
from damage of high temperature.
KSD301
Temperature Controller
115 Degree C manual reset. Avoiding auto-heating after water
boiled while power on.
KSD301
Temperature Controller
80 degree C automatic reset. For energy-saving and safety,
the cooling fan's running is controlled by chamber temperature.
Clear the circuit when short circuit or over current.
Rocker Switch
(Power Switch)
Convenient to start or end the distiller at any time
MANUFACTURER IS NOT HELD RESPONSIBLE FOR ANY ARBITRARY
DISASSEMBLY, AMENDMENT WITH THE UNIT, BY UNAUTHORIZED
PERSON OR UNPROFESSIONAL TECHNICIAN
2.4 Operating Risk
For avoiding risk, please be cautious at operation.
Operating Risk
For safety, please protect the cover after open it, for it can close automatically under external
pressure.
Burn hazard
Do not open the cover while working, because you may burned by water vapour.
The risk of contamination
For avoiding leaving contamination in chamber, please clean chamber as soon as possible.
To Next Page
Loading...