Wouxun KG-UV9G - User Manual

KG-UV9G
PRO
GMRS
Two-Way Radio!
Transceiver & Scanner!
FCC PART 95E Certified
FCC ID: WVTWOUXUN19!
FCC PART 95 Warning
This device operates on GMRS (General
Mobile Radio Service) frequencies, which
require an FCC (Federal Communications
Commission) license. You must be
licensed prior to transmitting on these
frequencies. Serious penalties could
result for unlicensed use of GMRS
frequencies in violation of FCC rules, as
stipulated in the Communications Act’s
Sections 501 and 502 (amended). You
will be issued a call sign by the FCC,
which should be used for station
identification when operating the radio
on GMRS frequencies. You should also
cooperate by engaging in permissible
transmissions only, avoiding channel
interference with other GMRS users,
and being prudent with the length of
your transmission time. To obtain a
license or ask questions about the
license application, contact the FCC at
1-888-CALL-FCC or go to the FCC's
website: https://www.fcc.gov and
request form 605.!
C = CALL S = EARS/Safety E = EMER/Prepper T = Travel r = Repeater
–– Default Channel Programming Chart ––
The following factory/default channels are restored after performing a
RESET ALL function [MENU 61_RESET | ALL]. (custom SHTF prog. avail.)!
–– Feature Differences ––
The following features available in the original KG-UV9P have been removed
or modified to comply with FCC GMRS regulations and best practices.!
•
Cross-Band Repeater: Removed; Not allowed on GMRS.!
•
− Shift Direction: GMRS repeaters are positive offset only.!
• + Shift Direction: Allowed only on GMRS repeater pairs.$
(programmable via software only)!
• ROGER Beep, ALARM & SOS: Disabled for GMRS best practice.
• Power Levels: Restricted on some frequencies per FCC.$
Ch. 1–7 (L/M) | Ch. 8–14 (L only) | Ch. 15–30 (L/M/H)$
L = 0.5 Watts | M = 5 Watts (ERP) | H = 5.5 Watts (ERP) chs. 15-30!
• Modulation Bandwidth: Restricted on some frequencies per FCC.$
Ch. 1–7 (W or N) | Ch. 8–14 (N only) | Ch. 15–30 (W or N)$
W (20 kHz Mod., 25 kHz Ch.) | N (12.5 kHz Mod. & Ch.)!
–– Feature Additions & Improvements ––
The following features have been added or improved upon from the original
KG-UV9P.!
• Scanning Advance: When scanning in TO or CO Scan Modes
[MENU 28_SC–REV], you can now rotate the Channel Knob in
either direction to immediately advance/resume scanning when
you’ve encountered an unwanted signal. See the Scanning
section on the reverse side for more details.!
–– Basic Operation ––
• Key Presses: The PF2 & PF3 side-keys and several front panel
keypad keys allow short and long presses to access primary &
secondary functions (such as ✱-SCAN for the$
REV/SCAN functions — see the Programmable Function Keys
section on the reverse).!
•
A “long-press” involves holding down a key for about 1–2
seconds to activate the alternate key function, rather than a quick
momentary “short-press” for the primary key function.!
Thank you and congratulations on purchasing the most
advanced GMRS Two-Way Radio & Scanner ever made.
The WOUXUN KG-UV9G is built upon the trusted performance,
proven design, and quality manufacturing of the KG-UV9D(Plus) &
KG-UV9P amateur radios. It has been modified to comply with FCC
GMRS specs & regulations to deliver professional grade personal
business, recreational, EmComm, and SHTF comms & scanning.!
ATTENTION
Please read this entire manual addendum as it contains important safety
and compliance information for the proper handling and operation of your
new GMRS radio. The information in this addendum supersedes and
highlights differences between the enclosed original KG-UV9P manual and
this new KG-UV9G model.!
COMPLIANCE
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
This device complies with PART 15B of the FCC Rules.
Operation is subject to the following two conditions:!
1) This device may not cause harmful interference, and$
2) This device must accept any interference received, including
%%%%interference that may cause undesired operation.!
WARNING: MODIFICATION OF THIS DEVICE TO RECEIVE CELLULAR
RADIOTELEPHONE SERVICE SIGNALS IS PROHIBITED UNDER FCC RULES
AND FEDERAL LAW.
This device meets the requirements of FCC PART 15.121(b) for scanning
receivers in the following frequency ranges (in MHz): 76–108 / 108–136!
136–180 / 230–250 / 350–400 / 400–512 / 700–824 / 849–869 / 894–960!
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with a minimum distance of 2.5 cm between the radiator and your body. The
antenna used for this device must not be co-located or operating in
conjunction with any other antenna or transmitter.
CH #
CH Name
RX Freq.
TX Freq.
TX"
CTCSS
TX"
PWR
BW"
W/N
Scan
001
GMRS 01C
462.56250
462.56250
141.3
M
W
ON
002
GMRS 02S
462.58750
462.58750
210.7
M
W
ON
003
GMRS 03E
462.61250
462.61250
141.3
M
W
ON
004
GMRS 04
462.63750
462.63750
141.3
M
W
ON
005
GMRS 05
462.66250
462.66250
141.3
M
W
ON
006
GMRS 06
462.68750
462.68750
141.3
M
W
ON
007
GMRS 07
462.71250
462.71250
141.3
M
W
ON
008
GMRS 08
467.56250
467.56250
141.3
L
N
ON
009
GMRS 09
467.58750
467.58750
141.3
L
N
ON
010
GMRS 10
467.61250
467.61250
141.3
L
N
ON
011
GMRS 11
467.63750
467.63750
141.3
L
N
ON
012
GMRS 12
467.66250
467.66250
141.3
L
N
ON
013
GMRS 13
467.68750
467.68750
141.3
L
N
ON
014
GMRS 14
467.71250
467.71250
141.3
L
N
ON
015
GMRS 15C
462.55000
462.55000
141.3
H
W
ON
016
GMRS 16S
462.57500
462.57500
210.7
H
W
ON
017
GMRS 17E
462.60000
462.60000
141.3
H
W
ON
018
GMRS 18
462.62500
462.62500
141.3
H
W
ON
019
GMRS 19
462.65000
462.65000
141.3
H
W
ON
020
GMRS 20T
462.67500
462.67500
141.3
H
W
ON
021
GMRS 21
462.70000
462.70000
141.3
H
W
ON
022
GMRS 22
462.72500
462.72500
141.3
H
W
ON
023
GMRSr15
462.55000
467.55000
141.3
H
W
OFF
024
GMRSr16S
462.57500
467.57500
210.7
H
W
OFF
025
GMRSr17
462.60000
467.60000
141.3
H
W
OFF
026
GMRSr18
462.62500
467.62500
141.3
H
W
OFF
027
GMRSr19
462.65000
467.65000
141.3
H
W
OFF
028
GMRSr20T
462.67500
467.67500
141.3
H
W
OFF
029
GMRSr21
462.70000
467.70000
141.3
H
W
OFF
030
GMRSr22
462.72500
467.72500
141.3
H
W
OFF
Station ID
Your GMRS station call sign
must be transmitted using
voice in the English language,
or with Intl. Morse Code
telegraphy using an audible
tone: (a) Following a single
transmission or a series of
transmissions; and (b) After
15 minutes and at least once
every 15 minutes thereafter
during a series of
transmissions lasting more
than 15 minutes. You may
also use Unit #s and Names.!
1
2

Summary

Feature Differences

Cross-Band Repeater

Cross-Band Repeater functionality has been removed due to GMRS regulations.

Shift Direction

GMRS repeaters use positive offset; shift direction is restricted.

ROGER Beep, ALARM & SOS

ROGER Beep, ALARM, and SOS functions are disabled for GMRS compliance.

Power Levels

Power levels are restricted on certain frequencies as per FCC regulations.

Modulation Bandwidth

Modulation bandwidth is restricted on specific frequencies by FCC rules.

Feature Additions & Improvements

Scanning Advance

Allows immediate advance/resume of scanning with Channel Knob during unwanted signals.

Basic Operation

Key Presses

PF2 & PF3 keys and keypad allow access to primary/secondary functions via short/long presses.

Long-Press Function

A 'long-press' activates alternate key functions, requiring 1-2 seconds of holding.

Radio Controls & Indicators

Keypad Shortcuts

Provides quick access to radio functions like Menu, Scan, and Lock.

Scanning Modes

SE Scan Mode

Scans until a strong signal is received, then exits scanning.

TO Scan Mode

Scans, pauses for 5s on signal, then resumes scanning.

CO Scan Mode

Scans, pauses until signal ceases, then resumes.

FM Radio Operation

FM Radio Tuning

Tunes from 76 to 108 MHz, offering memory save and call functions.

Adding New Channels

VFO;FREQ Mode

Enter VFO/FREQ Mode to select or enter desired Rx frequencies.

Memory Channel Programming

Write frequencies as new channels using MENU 30_MEM-CH.

Overview

1. Function Description
2. Usage Features
3. Basic Operation
4. Scanning Features
5. FM Radio Features
6. Channel Management
7. Programmable Function Keys (PF Keys)
8. Station ID
9. Maintenance Features
10. Safety and Compliance

The Wouxun KG-UV9G PRO GMRS Two-Way Radio Transceiver & Scanner is an advanced communication device designed for personal business, recreational, emergency, and SHTF (Survival, Hunker Down, Tactical, and Family) communications, as well as scanning. It builds upon the trusted performance and design of previous Wouxun amateur radios, modified to comply with FCC GMRS specifications and regulations.

Function Description:

The KG-UV9G operates on GMRS (General Mobile Radio Service) frequencies, requiring an FCC license for transmission. It functions as both a two-way radio transceiver and a scanner. The device supports single and dual receiver modes, allowing users to monitor two frequencies simultaneously. It offers various scanning modes, including SE (Scan Exit), TO (Time Operation), and CO (Carrier Operation), to suit different monitoring needs. The radio also integrates a commercial FM radio feature, tuning from 76 to 108 MHz, which can be monitored while simultaneously "watching" for active signals on the main and sub-band receivers.

Usage Features:

Basic Operation:

• Power and Volume: The radio is turned on by rotating the On/Off/Volume Knob clockwise. This knob also adjusts the audio volume.
• Channel/Frequency Selection: Channels or frequencies can be selected using the Channel Knob, the up/down arrow keys, or by directly entering numbers via the 1-9 keypad.
• Main/Sub-Band Selection: The BAND key toggles the active MAIN receiver. The TDR-V/M (True Dual Receive) key switches between single and dual receive modes.
• Transmitting: To transmit, select a channel or frequency, short-press PF3 to confirm it's clear, then again to mute. Hold the radio upright, press and hold the PTT key, speak clearly, and release PTT to stop.
• Function Menu: The MENU key accesses the function menu. Users navigate with the Channel Knob or 1-9 keys, press MENU to edit, select a value, and press MENU again to save changes. EXIT or MENU can be pressed to abort without saving.
• Keypad Shortcuts: The keypad offers numerous shortcuts for quick access to functions like frequency/channel entry, FM radio memory, main receiver toggle, dual receive mode, VFO/frequency/channel name modes, menu access, scan, lock, channel/function/value navigation, and VHF/UHF toggle.

Scanning Features:

• Scan Modes:
  • SE Scan Mode: Scans until a signal breaks squelch, then stops scanning and remains on that channel/frequency.
  • TO Scan Mode: Scans, pauses for 5 seconds upon signal reception, then resumes.
  • CO Scan Mode: Scans, pauses until the signal ceases, then resumes if no signal returns after 3 seconds.
• Scan Group Selection: Users can assign a specific scan group (01-10) to each receiver independently via MENU 49_SCN-GP.
• Initiating Scan: Long-press the *-SCAN key to start scanning channels or frequencies on the current MAIN band. To scan on the other receiver, make it the MAIN receiver first, then long-press *-SCAN.
• Stopping Scan: Switch to the desired receiver using the BAND key, then press any key other than BAND, EXIT, or *-SCAN.
• Scanning Advance: While in TO or CO Scan Modes, rotating the Channel Knob immediately advances or resumes scanning past an unwanted signal.

FM Radio Features:

• Access: Short-press PF2 to enter/exit the FM Radio feature.
• Modes: Toggle between IN FRQ (In Frequency) VFO Mode, Memory Save, and Memory Call modes using a short-press of the #-LOCK key.
• Scanning: Press the *-SCAN key to scan for an active FM Radio station.
• Selection: Use 1-9 keys or the Channel Knob to select a frequency or memory channel.

Channel Management:

• Adding New Channels: Users can add new simplex GMRS Tx/Rx or other Scanner Rx-Only channels via the keypad in VFO/FREQ Mode. Repeater channels can be added via software.
• Saving Channels: Enter the desired Rx frequency in VFO/FREQ Mode, then use MENU 30_MEM-CH to write it to an unused memory channel (displayed in red).
• Channel Parameters: In Channel Mode, use the Function Menu to set parameters like W/N (Wide/Narrow bandwidth), TXP (Transmit Power), BCL (Busy Channel Lockout), Rx-CTC/DCS (Receive CTCSS/DCS), TX-CTC/DCS (Transmit CTCSS/DCS), CH-NAME (Channel Name), SCAN-ADD (Add to Scan List), and SCAN-GP (Scan Group).

Programmable Function Keys (PF Keys):

• PF1 (momentary): Sub-Band Receiver TX.
• PTT (momentary): MAIN Receiver TX.
• PF2 (short-press): Broadcast FM Radio (On/Off).
• PF2 (long-press): Flashlight/Torch (On/Off).
• PF3 (short-press): Monitor (Open/Close Squelch).
• PF3 (long-press): Stopwatch (Start/Stop/Off-Reset).
• Side-Keys: PF2 and PF3 side-keys allow short and long presses for primary and secondary functions.

Station ID:

• GMRS station call signs must be transmitted via voice in English or Intl. Morse Code telegraphy.
• Transmission timing: After a single transmission or series, after 15 minutes, and at least once every 15 minutes thereafter during transmissions lasting over 15 minutes.
• Unit numbers and names can also be used for identification.

Maintenance Features:

• Reset Function: The device includes a RESET ALL function (MENU 61_RESET | ALL) to restore factory/default channels and settings.
• Software Programming: The radio supports free programming software, allowing users to customize settings, add repeater channels, and even change the "BetterSafeRadio" display message to their own call sign (up to 16 characters). This also allows for programming positive shift direction for GMRS repeater pairs.

Safety and Compliance:

• FCC Compliance: The device complies with FCC PART 15B rules for scanning receivers and PART 95E for GMRS operation.
• Transmission Safety: Do not transmit without an antenna attached, with a damaged antenna, while touching the antenna, around explosives, or while refueling a vehicle. Use only batteries and chargers designed for the radio.
• Radiation Exposure: Maintain a minimum distance of 2.5 cm between the radiator and your body during operation. The antenna must not be co-located or operating in conjunction with any other antenna or transmitter.

Wouxun KG-UV9G Specifications

General

Channel Capacity	999
Power Output	5W / 1W
Battery Capacity	2000mAh
Operating Voltage	7.4V DC
Channel Spacing	12.5/25 kHz
Antenna Impedance	50Ω
Display	LCD
CTCSS/DCS	Yes
FM Radio	Yes
Bluetooth	No
GPS	No
Frequency Range	136-174MHz