2. Introduction
Energy Meter and Limiter KLW202 was designed for R/C boats with special needs such
as high current consumption, water resistance. During production we use potting process, a
complete electronic assembly is filled in a vacuum with a solid compound. The device maintains
high measurement accuracy even after sinking.
The device has a double function. Energy Meter shows in real time the amount of
energy consumed. Limiter after reach the programmed limit of energy reduce the throttle demand to
the ESC. The device allows to program four different energy limits. Switching between them is
done by short pressing the SET button. The ramp time, throttle minimum and limit time could be
programmed.
The KLW202 is a perfect solution for training and competitions. During training user
can set any value of energy limit and see how many energy consumed. During competitions limiter
is programmed and the SET button is sealed with a non-removable sticker, user can’t change
settings.
If the energy limits will be updated by NAVIGA, there is no need to return the device to
the manufacturer or to buy a programmer. The change can be made yourself from the menu by
holding down the SET button for a longer time.
Features:
● Current measurement up to 200 A.
● Minimal power loss by the use of silicone connecting cables with a cross section area of
10 AWG (5.3 mm2) and sensor resistor of 0.0001 Ω.
● High waterproof, IP67.
● No need a special programmer and additional switch button
● High accuracy.
● Clear LED display.
● Double function: energy meter and limiter.
● Fast changing a limit value, 4 values are stored in the memory
● High credibility, value of the programmed limit and other parameters could be shown on
display at any time.
3
To Next Page
Loading...