WP XACT PRO 8950 - Service Work on the Chassis; Raising Motorcycle with Lift Stand; Removing Standard Shock Absorber; Installing WP PRO COMPONENTS Shock Absorber

8 SERVICE WORK ON THE CHASSIS
12
8.1 Raising the motorcycle with a lift stand
Note
Danger of damage The parked vehicle can roll away or fall over.
– Park the vehicle on a firm and level surface.
401942-01
– Raise the motorcycle in accordance with the instructions of
the vehicle manufacturer.
Neither wheel is in contact with the ground.
– Secure the motorcycle against falling over.
8.2 Removing standard shock absorber
H03314-10
– Remove the standard shock absorber as per the instructions
of the vehicle manufacturer.
8.3 Installing the WP PRO COMPONENTS shock absorber
H03314-11
– Install the shock absorber in accordance with the instructions
of the vehicle manufacturer.
8.4 Removing the motorcycle from the lift stand
Note
Danger of damage The parked vehicle can roll away or fall over.
– Park the vehicle on a firm and level surface.