WPM WELHOME PRO KD-310 - Preliminary Steps before First Start-Up

3
1. Rinse the components.
2. Remove the lid and take the water tank
out.
Preliminary Steps Before First Start-up
When using the machine for the first time, you must carry out these steps:
1
Remove the water
tank panel.
2
3. Carefully rinse the tank
and lid with water.
4. Carefully rinse the supplied
water filters and filter holders.
4
3
5. Put the tank back into
the machine.
5
8. The LED display will light up with indications when the machine is ready.
MAX
2.5L
6
7
6. Fill the tank with still mineral water
or potable drinking water of good quality.
7. Put the lid and the water
tank panel back on.