TOWER UNIT
Inframed kitchen Tower Guide
For Internal Use: WKIN00289_Inframed_Kitchen_Guide_Rev3
Page 13
Step 1.
Set height of the legs to 140mm and attach to the unit.
Step 2.
Using 4 x 40mm screws, attach 70 x 30mm rail to the end of the unit.
Ensure rail is positioned door thickness + 2 mm forward from the front of the
unit. Cover screw heads with cover caps.
The rail is 30mm larger than the height of the unit with legs attached.
See Customer Specic Kitchen Plan for rail positioning.
30mm
To Next Page
Loading...
