How to use
WT-M-1602-30 comes from the factory with 4321 administrator PIN.!
Before you start using it, you must change the factory-assigned passwords. Two different PIN can be
registered in the lock, one as administrator and one user. !
The administrator PIN is authorized to define the user PIN or reset the lock to factory settings. !
If you want to unlock with the administrator PIN, key in the administrator PIN, then tap OK. In this case, the
lock is unlocked, but the user password is deleted.!
Change PIN
1. Changing the Administrator PIN!
1.1.
Enter the default administrator PIN 4 3 2 1 and touch OK.!
1.2.
It beeps once and the unlock light turns on.!
1.3.
When you press and hold OK for more than 2 seconds, the unlock light starts flashing.!
1.4.
Key in and enter the new admin PIN and tap OK. (Your new PIN can be between 4 and 15 digits).!
1.5.
It beeps once and the new admin PIN is confirmed!
⚠ You can use 4 and 15 digits PIN.
⚠ When you enter the administrator PIN and tap OK, the user password will return to 1 2 3 4.
2. Creating & Changing User Password!
2.1.
Keying 1 2 3 4 + OK.!
2.2.
It beeps once and the unlock light turns on.!
2.3.
When you press and hold OK for more than 2 seconds, the unlock light starts flashing.!
2.4.
Enter your new password and tap OK.!
2.5.
It beeps and the new password is confirmed.!
⚠ PIN are not deleted even if you remove the battery. So remember which PIN is administrator. If you forget
the administrator PIN, send the serial number next to the battery box to bilgi@securiturk.com. If we verify your
identity, we'll send you the factory reset password.
⚠ Administrator PIN and user PIN must be different from each other.
To Next Page
Loading...