WT WT-M-1602-30 - Frequently Asked Questions; Dimensions

WT-M-1602-30! ! / 5 5
7.2.Disabling Scramble code!
•
Key in the user PIN and then tap OK.!
•
It beeps once and the unlock light turns on.!
•
Press and hold OK for more than 2 seconds and the unlock light starts flashing.!
•
Tap OK once again.!
•
Touch 4, then 1, then touch OK.!
•
One beep sounds. The Scramble Code mode is turned off.
Dimensions
Frequently Asked Questions
Problem
Possible Cause
Action
The lock beeps 3 times after entering
the PIN.
The PIN entered is
incorrect.
If you forget the PIN, contact us to get the factory
reset PIN.
"The lock beeps twice after entering
the password.!
Unlocked light flashes 2 times.
Battery low light is on.
Battery low. Replace
CR2032 model battery.
After entering the password, the lock
beeps 1 time. The Unlock light is
flashing.
The lock is not in the
correct lock position.
Turn the lock back to the locked position.
After entering the password, it does
not unlock.
The beeper may be
damaged.
Contact us to change the lock.
SECURITURK
Document No: S20202K00022
www.securiturk.com!
www.elektronik-guvenlik.com
Fixing hole size