11
Working safely with this machine is
possible only when the operating
and safety information are read
completely and the instructions con-
tained therein are strictly followed.
❏ The machine must not be damp and must also not
be operated in damp surroundings.
❏ Be careful of hidden electrical lines or gas and wa-
ter pipes. Check the working area, e. g., with a
metal detector.
❏ Keep long hair away from the machine. Do not op-
erate while wearing loose clothing.
❏ Wear hearing protection when drilling with im-
pact. The influence of noise can cause hearing de-
fects.
❏ Use the supplied auxiliary handle. Loss of control
can lead to accidents.
❏ Before each use, check the machine and battery. If
damage is detected, do not use the machine. Have
repairs performed only by a qualified technician.
Never open the machine yourself.
❏ Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
❏ Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact acci-
dentally occurs, flush with water. If liquid con-
tacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or
burns.
❏ Before any work on the machine itself (e. g.
maintenance, tool change, etc.) as well as when
transporting and storing, always set the rotation-
al direction switch to the centre position. Other-
wise danger of injury is given when unintentionally
actuating the On/Off switch.
❏ Ensure the switch is in the off position before in-
serting battery pack. Inserting the battery pack
into power tools that have the switch on invites ac-
cidents.
❏ Convince yourself before using that the battery is
securely seated in the machine.
❏ Do not strain the machine so heavily that it comes
to a standstill.
❏ When working with the machine, always hold it
firmly with both hands and provide for a secure
stance.
❏ Use a clamping device to secure the workpiece be-
fore drilling.
❏ Be careful when screwing in long screws; danger
of sliding off.
❏ For screws, work using with a low speed.
Battery and Battery Charger
❏ The enclosed operating instructions for the bat-
tery charger must be read carefully!
❏ Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one
type of battery pack may create a risk of fire when
used with another battery pack.
❏ Allow a heated battery to cool before charging.
Protect the battery from heat and fire:
Danger of explosion! Do not place the
battery on radiators or expose to strong
sun rays for a longer time; temperatures
over 50 °C cause damage.
❏ Do not open the battery, and protect it from im-
pact. Store in a dry and frost-free place.
❏ When battery pack is not in use, keep it away
from other metal objects like paper clips, coins,
keys, nails, screws, or other small metal objects
that can make a connection from one terminal to
another.
Shorting the battery terminals together may cause
burns or a fire.
Do not dispose of the
battery in household
waste or discard into
fire or water.
❏ Use only original Würth parts and accessories.
For Your Safety
GB
☞
For further notes on safety refer to enclosed sheet.
BS 28 Combi.book Seite 11 Mittwoch, 21. Dezember 2005 4:23 16
To Next Page
Loading...
Need help?
General