Würth ISS 45-M automatic

Other manuals for Würth ISS 45-M automatic

Questions and Answers

A
Alexander GilmoreAug 10, 2025
Why is the suction power decreasing on my wurth Vacuum Cleaner?
- W
  William TranAug 11, 2025
  If the suction power of your wurth Vacuum Cleaner decreases, remove any obstructions from the suction nozzle, extension wand, suction hose, or flat pleated filter. You may also need to replace the paper filter bag. Try dedusting the flat pleated filter by actuating the filter cleaning system and ensuring the filter cover is properly engaged. If the problem persists, replace the flat pleated filter.
R
robertskathyAug 17, 2025
How to fix a wurth Vacuum Cleaner when the suction turbine does not run?
- M
  michael33Aug 17, 2025
  If the suction turbine of your wurth Vacuum Cleaner does not run, check the cable, plug, fuse, and socket. Clean the electrodes and then switch the unit on.
J
Jonathan HumphreyAug 22, 2025
What to do if wurth Vacuum Cleaner ejects dust while vacuuming?
- C
  Christine ButlerAug 22, 2025
  If dust is ejected during vacuuming with your wurth Vacuum Cleaner, check that the flat pleated filter is correctly positioned. If it is, try replacing the flat pleated filter.
C
Carrie KimAug 28, 2025
Why does the suction turbine keep switching off on my wurth Vacuum Cleaner?
- T
  tevansAug 29, 2025
  If the suction turbine of your wurth Vacuum Cleaner switches off, the solution is to empty the container.
K
Katelyn JenningsSep 4, 2025
What to do if wurth Vacuum Cleaner doesn't restart after emptying the container?
- L
  Logan FosterSep 4, 2025
  If the suction turbine of your wurth Vacuum Cleaner does not restart after emptying the container, switch the unit off and wait for 5 seconds. Then, switch it on again. Also, clean the electrodes and the space between them.