GB - 3
– This appliance contains harmful dust.
Evacuation and maintenance work,
including the disposal of the dust col-
lection containers, may only be per-
formed by specialists who wear the
appropriate protective equipment.
– Do not use the appliance without the
complete filtering system.
– Please follow the safety regulations
applicable to the materials that are to
be treated.
The appliance allows 2 operating modes:
1 Industry vacuum cleaner mode (socket not
used)
2Dedusting mode (socket used)
Connect the suction hose and insert the suction
nozzle or connect to the dust-generating de-
vice depending on the operating mode.
몇 WARNING
The flat pleated filter must always be in
place while vacuuming.
몇 WARNING
Do not vacuum without the filter ele-
ments; otherwise, the suction motor can
get damaged and this can be hazardous
to health on account of increased release
of fine dust particles.
The horn blows when the air speed falls below
20 m/s.
Note: The horn reacts to negative pressure.
Set the rotary switch to the correct suction hose
cross-section.
Static charge is deflected by providing earthing to
the connection nozzles. This prevents the formation
of sparks and current shocks due to attachments
(option) with electrical conductivity.
– The appliance is equipped with a fleece filter
bag with a locking slide, order no. 0702 400
072 (5 units).
Note: You can use this appliance to take up all
types of dust up to dust class M. It is statutorily nec-
essary to use a dust collection bag.
Note: The appliance is suited as industrial vacu-
um cleaner and as dedusting device for the mobile
operation to take up dry, non-combustible dusts
with MAK values greater than or equal to 0.1 mg/
m
3
.
– When vacuuming up fine dust, an additional
fleece filter bag, a dust bag (special accesso-
ry) or a membrane filter (special accessory)
must additionally be used.
Illustration
Release and remove the suction head.
Insert the fleece filter bag.
Insert and lock the suction head.
Illustration
Note: The opening of the disposal bag must be
pulled all the way over the ledge of the suction sup-
port.
Release and remove the suction head.
Attach the disposal bag (option).
Pull disposal bag over the container.
Insert and lock the suction head.
DANGER
The membrane filter must not be used to
vacuum health-hazardous dusts.
Note: If you work without the fleece filter bag/
dust bag, you must use a membrane filter to protect
the suction head.
Illustration
Release and remove the suction head.
Pull the membrane filter (option) over the con-
tainer edge.
Insert and lock the suction head.
Start up
Horn
Anti-static system
Dry vacuum cleaning
Install fleece filter bag
Installing the dust disposal bag
Install membrane filter
19
To Next Page
Loading...
