Würth PINPULLER SPOT - Program Overview

15
Program overview
Program Application
1.5 90%
3 To weld on PinPuller
®
puller electrodes.
3.0 90%
3 To weld on the dent killer puller electrode.
2.0 90%
3 To weld on special puller eyes.
4.0 99%
3 To weld on corrugated wires.
6.0 80%
3 For hot upsetting with the copper electrode (item no. 0691 500 178)
40%
3 For panel pulling with the carbon electrode.
2.0 80%
3 To weld on perforated discs.
5.0 90%
3 To weld on the earth cable.