Würth RL 5-14 - Laser Classification and Standards

Würth RL 5-14
13
Safety Directions
en
m
WARNING
High mechanical stress, high ambient temperatures or immersion into fluids can cause leakage, fire or explosions
of the batteries.
Precautions:
Protect the batteries from mechanical influences and high ambient temperatures. Do not drop or immerse batteries
into fluids.
m
WARNING
If battery terminals are short circuited e.g. by coming in contact with jewellery, keys, metalized paper or other
metals, the battery can overheat and cause injury or fire, for example by storing or transporting in pockets.
Precautions:
Make sure that the battery terminals do not come into contact with metallic objects.
1.6 Laser Classification
1.6.1 General
General The following chapters provide instructions and training information about laser safety according to international
standard IEC 60825-1 (2007-03) and technical report IEC TR 60825-14 (2004-02). The information enables
the person responsible for the product and the person who actually uses the equipment, to anticipate and avoid
operational hazards.
)
According to IEC TR 60825-14 (2004-02), products classified as laser class 1, class 2 and class 3R
do not require:
• laser safety officer involvement,
• protective clothes and eyewear,
• special warning signs in the laser working area
if used and operated as defined in this User Manual due to the low eye hazard level.
)
National laws and local regulations could impose more stringent instructions for the safe use of lasers
than IEC 60825-1 (2007-03) and IEC TR 60825-14 (2004-02).