Wyrestorm MX-0606-H2 v2 - Matrix Operation: Input;Output Control; Selecting Input Sources for Outputs; Front Panel Control Operations; Handheld IR Remote Control Usage

H2 Matrix Operation
Selecting an Input and Output
User Guide
Copyright © 2016 WyreStorm Technologies | wyrestorm.com
H2 Matrix Operation User Guide | 160330
North America: 518-289-1294 | EMEA/ROW: 44 (0) 1793 230 343
support@wyrestorm.com
1 of 1
Using Front Panel Buttons
Using the Handheld IR Remote
1. Press the Left or Right arrow to highlight the output in the
display. The source number will begin to flash slowly.
2. Press the Up or Down arrow to select the input number.
3. Press EnterWRFRQUPVHOHFWLRQDQGDVVLJQWKHVHOHFWHGLQSXW
to the selected output.
From Front Panel
1. Locate the output number in the list.
2. Press the Left arrow to select the previous input or the Right
arrow to select the next input. Continue until the desired content
appears on the display device for the chosen output.
From Remote Zone
1. Locate the source number you wish to select.
2. Press the Left arrow next to the input number to select the desired
source..