Wyrestorm MX-0404-SCL

Need help?

Do you have a question about the Wyrestorm MX-0404-SCL and is the answer not in the manual?

Summary

Introduction and Features

Overview

Product introduction, features, and applications.

Key Features

Lists seamless switching, 4K@60Hz, HDCP 2.2, EDID management, and advanced video processing.

Package Contents and Specifications

Package Contents

Lists all items included in the product package.

Technical Specifications

Details ports, signal type, resolution, and audio format.

Transmission Distance and General Information

Transmission Distance

Details the maximum cable lengths for HDMI transmission.

General Device Information

Covers operating temp, humidity, power, dimensions, and weight.

Rear Panel Port Identification

Installation and Wiring Procedures

Safety Warnings

Important safety precautions before installation and wiring.

Mounting Instructions

Steps for physically mounting the device using brackets.

Basic Operation and Control

Front Panel Button Control

How to perform basic switching using front panel buttons.

IR Remote Control Usage

How to control the device using the IR remote controller.

Advanced Control via Commands

RS232 Command Control

Using RS232 for API commands and configuration.

Telnet Command Control

Using Telnet for API commands and network control.

Web UI Matrix Control

Video Matrix Routing

Interface for routing inputs to outputs and viewing status.

CEC Control Settings

Controls for enabling/disabling CEC functions for displays.

Video Port Details

View detailed input/output port information.

Audio and Video Processing

HDMI A;V Mute Control

Muting or unmuting video and audio for HDMI outputs.

De-embedded Audio Mute

Muting or unmuting de-embedded audio for selected output ports.

Output Scaling Configuration

Configuration of scaler settings (Auto, Manual, Bypass) for outputs.

Matrix Presets Management

Saving Matrix Presets

How to save the current Video Matrix settings.

Loading Matrix Presets

How to load previously saved Video Matrix settings.

General Configuration Settings

Source Naming

Renaming input ports for easier identification.

Zone Naming

Renaming output ports for easier identification.

Advanced Configuration Settings

Lower Power Mode

Settings for enabling/disabling low power standby mode.

EDID Presets Configuration

Configuring EDID settings for input ports with available options.

EDID Information Management

Reading EDID Information

Action to read EDID information from a selected output port.

Writing EDID Information

Action to write EDID information to a selected input port.

Exporting and Importing EDID Files

Actions for managing EDID files with a local computer.

Connectivity Features

CEC Control Settings

Detailed controls for CEC functionality, including auto on/off and delay.

HDCP Encryption Management

Enabling or disabling HDCP encryption for input ports.

System Access and Network Settings

Change Login Password

Process to change the device's login password.

Network Configuration Options

Configuration of network settings, including IP type (DHCP/Static).

Web UI Customization and Firmware Update

Custom Web UI Logo

Instructions for uploading a custom logo for the Web UI.

Firmware Update via Web UI

Process for updating the device's firmware through the Web UI.

System Management and Diagnostics

Reboot and Factory Reset

Actions to restart the device or reset to factory defaults.

System Log Access

Accessing and exporting system log files for diagnostics.

Firmware Upgrade via Micro-USB

The WyreStorm MX-0404-SCL is a 4K 4x4 HDMI seamless matrix switcher designed for applications requiring seamless 4K switching. It features a compact enclosure and supports instant switching and free scaling up to 4K@60Hz SDR and HDR. The device allows four HDMI sources to be switched to four HDMI outputs. Additionally, it provides both analog and digital S/PDIF audio de-embedding for outputs 1 and 2.

Important Technical Specifications:

Input/Output Ports: 4 x HDMI IN, 4 x HDMI OUT, 1 x RS-232, 1 x LAN (RJ45), 2 x S/PDIF OUT, 2 x Analog AUDIO OUT, 1 x FW (Micro USB), 1 x DC 12V.
Input/Output Signal Type: HDMI with 4K@60Hz 4:4:4.
Input/Output Resolution Supported:
- VESA: 800x600, 1024x768, 1280x768, 1280x800, 1280x960, 1280x1024, 1360x768, 1366x768, 1440x900, 1600x900, 1600x1200, 1680x1050, 1920x1200 (all at 60Hz).
- SMPTE: 720x576P (50Hz), 1280x720P (50/59.94/60Hz), 1920x1080P (24/30/50/59.94/60Hz), 3840x2160 (24/25/30/50/59.94/60Hz), 4096x2160 (24/25/30/50/59.94/60Hz).
Audio Format:
- HDMI IN/OUT: Fully supports audio formats in HDMI 2.0 specification, including PCM 2.0/5.1/7.1, Dolby TrueHD, Dolby Atmos, DTSHD Master Audio and DTS:X.
- AUDIO OUT: Balance stereo audio.
- S/PDIF OUT: PCM 2.0/5.1, Dolby digital and DTS up to 5.1 Channel.
Maximum Data Rate: 18Gbps.
HDCP Compliance: HDCP 2.2 compliant and backward compatible.
Control Methods: Front Panel Buttons, IR, RS232, LAN (Telnet & Web UI).
Operating Temperature: 0°C to 45°C (32°F to 113°F).
Storage Temperature: -20°C to 70°C (-4°F to 158°F).
Humidity: 10% to 90%, non-condensing.
ESD Protection: Human-body Model: ±8kV (Air-gap discharge) / ±4kV (Contact discharge).
Power Supply: DC 12V.
Power Consumption (Max): 16W.
Device Dimension (W x H x D): 215mm x 42mm x 140.2mm / 8.46" x 1.65" x 5.52".
Product Weight: 1.2kg / 2.64lbs.
Transmission Distance (HDMI):
- 1080P@60Hz 24bpp: Input: 15m/50ft, Output: 10m/33ft.
- 4K@30Hz 4:4:4 24bpp / 4K@60Hz 4:2:0 24bpp: Input/Output: 10m/33ft.
- 4K@60Hz 4:4:4 24bpp: Input/Output: 3m/10ft.

Usage Features:

Seamless Switching: Provides seamless switching between HDMI inputs and outputs without a black screen transition.
Video Processing: Advanced video processing capabilities include free scaling between 480p and 4K@60Hz, conversion between SDR and HDR formats, and conversion on color space, chroma, and color bits. It supports rich scaler processing modes, including auto scaler, manual scaler, and video bypass.
EDID Management: Offers comprehensive EDID management features, including EDID presets, EDID copy from outputs, and custom EDID. Users can select desired EDID options for each input port, copy EDID from any output, or read/write/export/import EDID files.
Control Options:
- Front Panel Buttons: Users can perform basic input source switching to output displays. Select output port(s), then an input port, and press ENTER to implement the selection.
- IR Control: The device can be controlled via an IR remote controller. Connect the IR receiver cable to the IR EXT. port and ensure the receiver eye is accessible.
- RS232 Control: Connect a control PC to the RS232 port. API commands can be sent after configuring serial port parameters (Baud Rate: 115200 bps, Data bits: 8 bits, Parity: None, Stop bits: 1 bit, Flow control: None).
- Telnet Control: Connect a control PC to the LAN port. Telnet commands can be used to control the device. The device's IP address can be obtained via RS232.
- Web UI: A web-based user interface provides basic controls and advanced settings. It is accessible through modern browsers by inputting the device's IP address. The default password is "admin".
Matrix Control (Web UI):
- Video Matrix Control: Manages the distribution of input sources to output displays. Users can click buttons in a table to select inputs for specific outputs or route an input to all outputs.
- HDMI A/V Mute: Allows muting/unmuting video and audio for selected HDMI output ports.
- De-embedded Audio Mute: Allows muting/unmuting de-embedded audio for selected audio output ports.
- Scaling: Configures scaler settings for each output. Options include "Auto" (adapts to display EDID), "Manual" (selects a desired output resolution), and "Bypass" (bypasses the input video source, available for outputs 1 and 2 only).
- Presets Matrix Control: Saves or loads matrix settings to/from presets.
General Setting (Web UI):
- Source Naming: Allows changing the names of input ports (up to 15 characters).
- Zone Naming: Allows changing the names of output ports (up to 15 characters).
Advanced Setting (Web UI):
- Lower Power Mode: Enables the device to shut down all video outputs and enter standby status. Re-login is required when exiting this mode.
- CEC Control: Provides options to power on/off connected displays via CEC and configure an "Auto Delay Time" for displays to power off automatically when no signal is present.
- HDCP: Enables or disables HDCP encryption for each input port (default is On).
Network Configuration: Allows setting the IP address type to DHCP (automatic assignment) or Static (manual configuration).

Maintenance Features:

Firmware Upgrade: Supports firmware upgrades through the Web UI or the Micro USB port on the rear panel.
- Web UI Upgrade: Users can browse for the firmware file and click "Update".
- Micro USB Upgrade: Requires connecting the device to a PC, sending a specific RS232 command, and using the USBDownloadTool2.1.exe software to perform the upgrade.
System Reboot/Factory Reset: The Web UI provides options to reboot the device or perform a factory reset.
Log Retrieval: The Web UI displays system setting change records, which can be exported as a log file.
Custom Web UI Logo: Users can upload a custom logo (PNG format, less than 300x60 pixels) for the Web UI.
Change Login Password: The Web UI allows users to change the login password (alphanumeric, 4 to 16 characters).