24
Firmware Upgrade
The device supports rmware upgrade through web UI and
micro-USB port on rear panel.
To upgrade firmware through Web UI, see FW Update section.
To upgrade rmware through micro-USB port, perform the
following:
1. Download the upgrade file on your local PC.
2. Connect the device’s micro-USB port to your PC. Send the
command UPG UFU<CR><LF> to the device using a RS232
serial tool.
3. Open the upgrade file folder and launch the
USBDownloadTool2.1.exe software.
4. Click “Upgrade Firmware” to start upgrade. A window will pop
up, indicating that firmware is completed successfully.
To Next Page
Loading...
