21
Change Login Password
This section is to change login password.
Default setting: admin
Note: Password must be 4 to 16 characters in length,
alphanumeric only.
Network
This section is to set between the static and dynamic IP address.
• IP Type:
⇨ DHCP: When enabled, the IP address of the Matrix is
assigned automatically by the DHCP server connected.
⇨ Static: When enabled, you need to set up the IP address
manually.
Default setting: DHCP
• Save: Click to save and perform the network setting, and the
setting change will take effect immediately.
Note:
• When "Static" is selected, please ensure your PC is in the
same network segment as the device.
To Next Page
Loading...
