13
Note: When all is configured properly, you can control the device
through commands, which are available in the separate
document “API Command Set_MX0404-N301-A00”.
Web UI
The Web UI designed for this device allows for basic controls and
advanced settings. It can be accessed through a modern
browser, e.g. Chrome, Safari, Firefox, IE10+, etc.
To get access the Web UI:
1. Connect the LAN port of the device to a local area network.
(Ensure there’s a DHCP server in the network so that the
device can obtain a valid IP address.)
2. Connect the PC to the same network as this device.
3. Input the device’s IP address in the browser and press Enter,
the following window will pop up. (Refer to Obtain IP Address
of the Device section to get the device’s IP address quickly).
4. The following window pops up. Input the password (default
password: admin) and click Login.
5. Input a new password in the dialog box and click Apply to
enter the main page. The password shall be alphanumeric
with 4 to 16 characters in length.
To Next Page
Loading...
