16
De-embedded Audio Mute
• ON: Select to mute de-embedded audio for selected audio
output ports.
• OFF: Select to unmute de-embedded audio for selected
audio output ports.
Default setting: OFF
Scaling
This section manages scaler configurations for Output 1-4. Three
operation options are provided for each output scaler.
• Auto: Select to automatically adapt to display EDID and
resolution. E.g. If the display supports up to 4K@30Hz, the
device will output signal with 4K@30Hz.
• Manual: Select a desired output resolution from the
Resolution dropdown menu for the selected output port.
• Bypass: Select to bypass the input video source to the
selected output port. When “Bypass” is selected, black
screen may occur on the display if unsupported resolutions
are switched to the display.
Note: “Auto” and “Manual” options are available for all output
ports (1 to 4), while “Bypass” is available for Output 1 and Output
2 only.
To Next Page
Loading...
