18
This section allows you to change to new output ports’ names.
• Save: Click to save and apply all changes.
• Reset: Click to reset all changes.
Note: The length of each new name shall not exceed 15
characters.
Advanced Setting
Lower Power Mode
This section provides setting of Lower Power Mode. In Low
Power Mode, the device will shut down all video outputs and
enter standby status.
• ON: Select to turn on Lower Power Mode to make the device
enter standby status.
Note: When on is selected, the web UI page will log out, you
need to re-login to enter the main page.
• OFF: Select to turn off Lower Power Mode to make the
device work properly.
Default setting: OFF
EDID Presets
This section allows you to congure EDID setting for each input
port. Available EDID options are provided from the dropdown
menu, click to select a desire option.
• Copy From Output 1
• Copy From Output 2
• Copy From Output 3
To Next Page
Loading...
