Wyrestorm MX-0404-SCL - General Configuration Settings; Source Naming; Zone Naming

17
Presets Matrix Control
This section saves or loads the settings of or to Video Matrix
Control section.
• Save: Click to save settings of Video Matrix Control section.
• Load: Click to load settings to Video Matrix Control section.
To save a setting of Video Matrix to Preset 1:
1. Complete the input and output routing in Video Matrix
Control section.
2. Click “Save” in “Preset 1”. Then the “Preset 1” is saved
successfully.
General Setting
Source Naming
This section allows you to change to new input ports’ names.
• Save: Click to save and apply all changes.
• Reset: Click to reset all changes.
Note: The length of each new name shall not exceed 15
characters.
Zone Naming