Wyrestorm SW-0501-HDBT - Configure Video Output Resolution; Query Video Output Resolution; Power on (Wake Up) CEC Enabled Device; Power off (Sleep) CEC Enabled Device

10 of 14
SW-0501-HDBT / SW-1001-HDBT Presentation Switcher/Scaler Application Program Interface (API) | 151021-1044
Configure Video Output Resolution
Syntax
gbset fvo [Value]
Description
Sets a desired resolution for HDMI and HDBT outputs.
Accepted Values:
AUTO
1080P_60
1080P_50
1080P_30
1080P_25
1080P_24
720P_60
720P_50
576P_50
480P_60
640X480_60
800X600_60
1024X768_60
1280X720_60
1280X768_60
1280X800_60
1280X1024_60
1366X768_60
1440X900_60
1600X1200_60
1680X1050_60
1920X1080_60
1920X1200_60
Example Command:
gbset fvo 1920X1080_60
Response:
none
Query Video Output Resolution
Syntax
gbget fvo
Description
Obtains the resolution set for HDMI and HDBT outputs.
Example Command:
gbget fvo
Response
[Value]=Output Resolution
Example: 1920X1080_60
See Configure Video Output Resolution accepted
resolutions for details.
Power On (Wake Up) CEC Enabled Device
Syntax
e e_cec_one_touch_play
Description
Wakes up a CEC-enabled device such as a display
device connected through HDMI or HDBT port.
Example Command:
e e_cec_one_touch_play
Response
none
Power Off (Sleep) CEC Enabled Device
Syntax
e e_cec_system_standby
Description
Makes a CEC-enabled device such as a display device
connected through HDMI or HDBT port enter standby
mode.
Example Command:
e e_cec_system_standby
Response
none