Wyrestorm SW-0501-HDBT - 5 Switcher Commands; Source Selection; Query Current Source; Enable;Disable Auto Switching

8 of 14
SW-0501-HDBT / SW-1001-HDBT Presentation Switcher/Scaler Application Program Interface (API) | 151021-1044
5. Switcher Commands
Source Selection
Syntax
gbconfig --source-select [Source]
Description
Switches one input to all outputs.
Accepted Values:
SW-0501-HDBT
HDMI1
HDMI2
HDMI3
HDMI4
VGA1
SW-1001-HDBT
HDMI1
HDMI2
HDMI3
HDMI4
VGA1
VGA2
HDBT
Example Command for HDMI 3:
gbconfig --source-select HDMI3
Response:
none
Query Current Source
Syntax
gbconfig --show --source-select
Description
Obtains the current input selected.
Accepted Values:
SW-0501-HDBT
HDMI1
HDMI2
HDMI3
HDMI4
VGA1
SW-1001-HDBT
HDMI1
HDMI2
HDMI3
HDMI4
VGA1
VGA2
HDBT
Example Command:
gbconfig --show --source-select
Response:
Currently selected source
Example: HDMI3
Enable/Disable Auto Switching
Syntax
gbconfig --plug-detect=[Value]
Description
Enables or disables auto switching.
Accepted Values:
Y: Auto switching enabled
N: Auto switching disabled
Example Command:
gbconfig --plug-detect=y
Response:
none