UbONE
X-Driven
8
How to Use the Program
When you start the program, you will see this initial
screen.
Click on a selected file from the file list and the
image of the file is shown in the preview window in
the right-hand lower pane.
After connecting the memory card to PC, click
on to select the file named “_System.mdb”
under the Data folder of SD memory card and bring
out the data.
When the file is opened, the screen shows a list of
files (with date, time, and event information) on
the right-hand upper pane. (Please note that when
an image is recorded inside a moving vehicle with
poor GPS reception, the recorded time may be
inaccurate.)
Double-click the selected file, and the image is
shown in the main window.
After selecting several files while pressing the Shift
key, click on on the right-hand upper side
to see the selected images as a slide show.
To Next Page
Loading...