X10 SUPERREMOTE UR24A User Manual

3535
3535
35
3434
3434
34
3.3.
3.3.
3. Enter 014 to control
an IR Mini
Controller, 013 for
standard X10
control. The LED
turns off after the
last digit entered.
Note: In most cases, you will not need
to use the IR Mini Controller to receive
commands from the UR24A Learning
SuperRemote - the Transceiver Module
does this for you and has the added
advantage of working through walls. You
can’t control the IR Mini Controller and
the Transceiver Module at the same time.
Note: The Housecode you choose must
match the Housecode on the Transceiver
Module you are using it with.
2.2.
2.2.
2. Press and hold
SETUP until the LED
indicator lights
steadily. Release
the Setup button.
3.3.
3.3.
3. Use the number
buttons to enter the
number equivalent
to the chosen
House Code (1=A,
2=B ..16=P).
1.1.
1.1.
1. Press and hold
SETUP until the LED
indicator lights
steadily. Release
the SETUP button.
2.2.
2.2.
2. Press and release
the X10 button.
4.4.
4.4.
4. Press the ENTER
button to confirm
the House Code.
The LED turns off.
CC
CC
C
ONTROLLINGONTROLLING
ONTROLLINGONTROLLING
ONTROLLING
ANAN
ANAN
AN
IR MIR M
IR MIR M
IR M
INIINI
INIINI
INI
C C
C C
C
ONTROLLERONTROLLER
ONTROLLERONTROLLER
ONTROLLER
(IR543) (IR543)
(IR543) (IR543)
(IR543)
If you already own an IR Mini Controller,
you will need to change the X10 Home
Automation code in the remote to use it.
The code for standard X10 Home
Automation is 013. The code to control
the IR mini controller is 014. To change
the code:

X10 SUPERREMOTE UR24A Specifications

General

Brand	X10
Model	SUPERREMOTE UR24A
Category	Universal Remote
Language	English