XAG P100 Pro Maintenance Instruction

XAG Australia
ABN 56 614 943 118
Unit 5, 11 Jullian Cl.
Banksmeadow NSW 2019
P. +61 (2) 9168 7918
E. info@xagaustralia.com.au
www.xagaustralia.com.au
XAG P100/P100 Pro Motor & ESC Mandatory
Maintenance Instructions
While the XAG P100/P100 Pro aircraft is operating, it would experience vibrations that
might cause the screws securing the Motor connector and ESC to loosen, potentially
causing a disconnection of power. The wear and tear of the isolators could have
prompted the melting due to heat during the operation. Such an event could trigger an
electrical surge and excessive heat production, possibly resulting in the Motor/ESC
failure.
1. Loosen the four screws securing the red bumper and then detach the bumper.

XAG P100 Pro Specifications

General

Max Payload Capacity	40 kg
Payload	40 kg
Tank Volume	40 L
Max Payload	40 kg
IP Rating	IP67
GNSS	GPS, GLONASS, BeiDou
Camera	FPV camera
Transmission Range	Up to 5 km
Max Spraying Width	10 meters
Operating Temperature	-10°C to 50°C