Need help?Do you have a question about the XAG P100 Pro and is the answer not in the manual?
Essential safety practices for operating the remote controller.
Precautions for maintaining the physical condition of the remote controller.
Ensures proper function and prevents damage to aircraft ports and connectors.
Critical safety and operational procedures for propellers.
Important considerations for effective and safe radar operation.
Instructions for correctly attaching and connecting the RevoSpray system.
Proper procedures for using and handling the aircraft battery.
Critical pre-flight and update safety measures for firmware.
How to maintain and use the XAG One application effectively.
Constraints and conditions for optimal aircraft performance.
Procedures and conditions for using the Return-to-Land function.
Routine checks and safety practices for component upkeep.
Rules and restrictions regarding aircraft modification and operation.
Safe practices and precautions for using pesticides with the drone.
Essential steps before commencing any flight operation.
An overview of the P100 Pro's features, capabilities, and design.
Indicators for the flight controller's RTK, 4G, and Wi-Fi status.
A detailed look at the components and features of the RevoSpray P3 system.
Procedures for thoroughly cleaning the RevoSpray system after operation.
An overview of the RevoCast P3 system's components and design.
An introduction to the ARC3 Pro remote controller's features and capabilities.
Visual indicators for the remote controller's battery level and charging status.
Instructions for inserting a SIM card into the remote controller.
Explanation of joystick controls for Mode 2 operation.
Step-by-step guide for calibrating joysticks using the XAG One app.
Procedures for safely starting motors and taking off the aircraft.
A detailed overview of the smart battery's structure and indicators.
How to check and interpret the battery level indicators.
An overview of the CM13600 battery charger and its components.
A list of all items included in the GNSS XRTK4 Mobile Station package.
Information on how to download and install the XAG One mobile application.
Fundamental information and options for the selected aircraft.
Process for adding the remote controller to the XAG One app.
Steps for setting up the XRTK Mobile Station.
Instructions for unfolding the aircraft's arms.
Methods for planning fields for autonomous flight operations.
Setting up the positioning mode for accurate mapping.
Procedure for ground-based offset correction for accurate field alignment.
Customizing spray parameters like volume and droplet size.
Steps to select Manual Operation mode with auxiliary features.
Accessing emergency control functions through the mobile application.
Specific cleaning steps for the RevoSpray system.
Recommended maintenance schedule and service plan for the aircraft airframe.
Technical specifications for the P100 Pro Agricultural RPA model.
Key flight parameters and performance data of the aircraft.
Specifications for the RevoSpray P3 centrifugal atomizing nozzles.
Detailed GNSS performance and specification data.
General| Max Payload Capacity | 40 kg |
|---|---|
| Payload | 40 kg |
| Tank Volume | 40 L |
| Max Payload | 40 kg |
| IP Rating | IP67 |
| GNSS | GPS, GLONASS, BeiDou |
| Camera | FPV camera |
| Transmission Range | Up to 5 km |
| Max Spraying Width | 10 meters |
| Operating Temperature | -10°C to 50°C |
To Next Page
