93
XAG AUSTRALIA
Link Device – XRTK4 Mobile Station
Follow the steps below to establish a connection between your XRTK4 base station and the ARC3 Pro
controller:
01. Start by placing the XRTK4 base station outdoors and power it on. Wait until the F1 indicator
displays a solid red light, indicating readiness to proceed.
02. To activate the base station's pairing mode, give a single press on the F1 button. You will hear
a double beep sound, indicating that the base station is now ready to pair with your ARC3
controller.
03. With your ARC3 Pro controller already switched on, press and hold the power button until you
hear a double beep. Observe the third light from the left on the controller; it should now be
flashing yellow. This signifies that the controller has entered pairing mode. Please note: It's
crucial to have a SIM card inserted in the ARC3 Pro for this process.
04. Upon successful pairing, the ARC3 controller will emit another double beep, signalling that it's
now paired with the base station. The previously yellow flashing light on the controller will now
be off.
📖
INSTRUCTION
Ⓝ
Notes
Even though the controller and base station are paired, you still need to add the base station to
your device page on the XAG One app.
To Next Page
Loading...
