XAG P100 Pro - Hover; Pause Flight; RTL (Return-To-Land)

XAG AUSTRALIA
56
Pause/Resume
During "Autonomous Flight", the Pause/Resume button serves to halt the aircraft mid-flight, causing it
to hover in place. To pause the aircraft, simply press this button once. This action can be particularly
useful in situations where you need to momentarily stop the drone for safety or operational reasons.
Hover / Pause Flight
Fn + the Pause/Resume
The Return-to-Land (RTL) command is a safety feature that prompts your drone to return to its launch
or home point. To execute the RTL command, press and hold both the Pause/Resume button and the
Fn (Function) button simultaneously. While RTL is in progress, Function Indicator A will flash yellow.
This serves as a visual confirmation that the RTL command has been activated and the aircraft is
enroute to its home point.
Always keep in mind that, safety is paramount when operating drones, so do not hesitate to use the
RTL function if you ever find yourself in a situation where you're unsure of the drone's position or if it's
in any potential danger.
RTL (Return-to-Land)
Fn Button
Pause/Resume