57
XAG AUSTRALIA
Optimal Transmission Zone
The effectiveness of your remote controller's signal hinges on the placement of the antennas. Ensure
the controller and aircraft are within optimal transmission zones by fine-tuning the direction of the
external RC antennas. Signal strength can fluctuate based on the antennas' positions, so users are
encouraged to adjust them for the strongest signal during operation.
To achieve an optimal transmission zone, aim to align the antennas so that they're parallel with each
other and perpendicular to the aircraft. Avoid pointing the tips of the antennas directly at the aircraft,
as this can lead to weaker signal transmission. Instead, the broadside (long flat side) of each antenna
should face towards the aircraft for optimal signal strength.
Keep in mind that factors such as antenna positioning and tightness, physical obstructions, and Wi-Fi
signal interference can influence the communication between the remote controller and the aircraft.
If the signal weakens, consider repositioning the antennas or operating the aircraft in an area with
fewer obstacles or Wi-Fi interferences for optimal performance.
Remember to always follow local regulations and guidelines when flying your drone, and maintain
line-of-sight with your drone at all times during flight.
ℹ
IMPORTANT
To Next Page
Loading...
