XAG AUSTRALIA
34
Disassembling RevoSpray P3
01. Refill the Liquid Tank with a solution of soap water or soap powder water, and engage all nozzles
to drain and clean out any remaining residues within the spray system.
02. After the first cleaning, refill the Liquid Tank with clean water and engage all nozzles again, using
the APP or Remote Controller. This will help to drain and clean out the remaining soap water
within the spray system.
03. Finally, place an empty Liquid Tank and engage all nozzles one more time to drain and clean out
any remaining residues within the spray system. This step will prevent residue leakage during
transportation that could potentially damage other items.
04. Using a damp rag, wipe and clean the exterior of the aircraft and the Liquid Tank to remove any
stains and foreign objects.
📖
INSTRUCTION
Chemicals can be corrosive, causing erosion within the equipment and reducing its lifespan. It is
recommended to thoroughly clean the aircraft after each operation and before disassembling or
swapping the Payload System.
Cleaning
To Next Page
Loading...
