33
XAG AUSTRALIA
04. Lastly, connect the two liquid tubes to the connectors of the Peristaltic pumps. Secure the
connected liquid tubes with cable ties to prevent disconnection or leakage.
ℹ
IMPORTANT
ℹ
It's crucial to conduct calibration during the initial use or after replacing the Peristaltic Pump.
This procedure helps to ensure system accuracy and optimal performance.
ℹ
Calibration should also be conducted after the swapping of any Task system, such as RevoCast
or RealTerra, to ensure proper system operation and to prevent potential errors.
04
To Next Page
Loading...
