161
XAG AUSTRALIA
after-flight maintenance & care
Maintenance and Care
Upon completion of agricultural drone operations, it is crucial to promptly clean the drone's exterior
and task module components. Regular maintenance and care are also essential to ensure optimal
performance and longevity of the drone.
Cleaning Procedure
Cleaning Procedure - RevoSpray System
Upon the conclusion of agricultural drone operations, it's critical to thoroughly clean the RevoSpray
system. This routine helps to prevent potential harm from human contact with any residual pesticides
during maintenance procedures. Follow these steps for a comprehensive cleaning:
Cleaning Agent:
Use soapy water or a solution of water and laundry detergent.
01. Refill the Liquid Tank with a solution of soap water or soap powder water, and engage all nozzles
to drain and clean out any remaining residues within the spray system.
02. After the first cleaning, refill the Liquid Tank with clean water and engage all nozzles again, using
the APP or Remote Controller. This will help to drain and clean out the remaining soap water
within the spray system.
03. Finally, place an empty Liquid Tank and engage all nozzles one more time to drain and clean out
any remaining residues within the spray system. This step will prevent residue leakage during
transportation that could potentially damage other items.
04. Using a damp rag, wipe and clean the exterior of the aircraft and the Liquid Tank to remove any
stains and foreign objects.
ℹ
If the drone is to be transported to a new location or is not going to be used for an extended
period, it is necessary to empty the Liquid Tank and ensure all liquid within the system is
completely drained.
ℹ
IMPORTANT
To Next Page
Loading...
