Storage and Transportation
Responsible Aircraft Operation
Maintenance
UPKEEP AND SAFETY OF COMPONENTS:
⚠
Post-Operation Cleaning: It is imperative to
meticulously clean all components of the aircraft
after each spraying or spreading operation. For
comprehensive cleaning guidelines, refer to the
"After-Flight Maintenance & Care" section.
⚠
Remote Controller Maintenance: After each
operational day, cleanse the surface and
antennas of the remote controller using a cloth
dampened with water, ensuring it is well-wrung to
prevent excess moisture.
⚠
Routine Inspection: Conduct a thorough
examination of every component of the aircraft in
alignment with the stipulations of the Maintenance
guide.
⚠
Unauthorized Repairs: Under no circumstances
should one attempt to repair the aircraft
independently. For repair guidance, contact
Support@xagaustralia.com.au.
⚠
Authorized Parts: Utilize only official XAG-
approved spare parts for any repair or
replacement needs.
⚠
WARNING
Ⓝ
Notes
POST-INCIDENT PROTOCOLS:
Incident Assessment: Should the aircraft be involved
in an incident or collision, it is mandatory to conduct a
rigorous inspection of all its parts. Any required repairs or
replacements must be addressed prior to the next flight.
Alternatively, for a comprehensive evaluation, contact
Support@xagaustralia.com.au to facilitate the return of
the aircraft to our warehouse.
SAFETY AND INTEGRITY OF COMPONENTS:
⚠
Hazardous Components: Small components,
including cables and tubes, pose a significant
ingestion risk. Ensure these parts are securely
stored and remain inaccessible to children and
animals.
⚠
Aircraft Security: During transportation, it is
imperative to securely strap the aircraft to prevent
any movement or potential damage.
⚠
Battery Removal: Prior to transportation, remove
the battery from the aircraft to mitigate risks
associated with battery damage or malfunction.
⚠
Tank Emptying: Ensure that both the liquid and
granular tanks are emptied before transportation.
Any residual content can pose risks during transit.
⚠
WARNING
To Next Page
Loading...
