Battery Charger
OPERATIONAL INTEGRITY:
01. Secure Connection: The charger's plug must
be securely inserted at all times. Inadequate
connections can lead to overcurrent, overheating,
02. Liquid Exposure Prevention: The charger must
remain free from any form of liquid, including
water and chemicals. Exposure can result in short-
circuiting, leading to irreversible damage.
03. Environmental Hazards: The charger must be
protected from environmental contaminants
such as sand, dust, and foreign objects. Such
obstructions can impair the fan's functionality,
leading to cooling inefficiencies and potential
overheating.
⚠
WARNING
FIRMWARE INTEGRITY & SAFETY:
01.
or updating the aircraft's firmware, a preliminary
test run of the drone is mandatory, and this must
be conducted without its propellers affixed. This
ensures the remote controller, motors, and other
integral electronic modules are operational.
Propellers should only be installed subsequent to
a thorough verification of system functionality to
mitigate potential hazards.
02. Safety During Updates: During firmware updates,
system calibrations, and parameter setting
procedures, it is imperative to maintain a secure
perimeter, ensuring both humans and animals are
at a safe distance.
⚠
WARNING
Ⓝ
Notes
Software and Firmware
VOLTAGE AND DEVICE HANDLING:
01. Voltage Compliance: The charger must only
be operated within its specified voltage limits.
Exceeding these limits can lead to severe
malfunctions.
02. Device Maintenance: Regular inspections are
required to ensure the charger's plug is free from
damage, rust, or corrosion. The charger must be
stored in a cool, dry environment to ensure its
longevity.
03. Physical Care: The charger must be handled with
utmost care. Any external damage can compromise
FIRMWARE UPDATES & MAINTENANCE:
01.
02. Sequential Updates: Post the aircraft's firmware
update, it is essential to verify and, if necessary,
to the latest available version.
03. Re-linking Post Update: There exists a possibility of
the remote controller becoming unlinked from the
aircraft subsequent to an update. In such instances,
re-establishing the link between the remote
controller and aircraft is crucial.
04.
update, all connections must be meticulously
inspected.
05.
integrity.
06. Updates Post Part Replacement: Should any
electronic components be replaced, an immediate
To Next Page
Loading...
