Individual Parts
Regarding Genuine and Functional Parts
Purchasing components from unauthorized sellers,
commonly found on ecommerce platforms like eBay
or Alibaba, carries substantial risk. Not only will the
product warranty be voided, but non-authorized parts
may cause performance degradation, malfunctions,
or total system failure. These risks can lead to safety
hazards, including potential injury or property damage.
Legal implications may also arise, including fines or
legal action, particularly if the accident occurs in a
regulated context or causes harm.
For the safe, reliable, and lawful operation of your XAG
Agricultural Drone, adhere strictly to these guidelines.
Always validate the seller's authorization status when
purchasing components and buy only from reputable
sources. Your drone is a sophisticated device; risking
advised. Prioritize safety by relying on XAG-certified
parts and guidelines.
To ensure optimal performance and safety when
operating XAG Agricultural Drones, strictly adhere to the
following guidelines:
⚠
EXCLUSIVELY USE AUTHENTIC XAG
COMPONENTS:
Parts must be genuine XAG or
certified by XAG. The utilization of unauthorized
parts or those from non-XAG certified
manufacturers may trigger system malfunctions
and compromise safety. Violation of this guideline
will result in the immediate voiding of the product
warranty.
⚠
ENSURE COMPONENTS ARE FOREIGN OBJECT
FREE:
Prior to each operation, verify that no
foreign objects, such as water, oil, soil, or sand,
have entered the aircraft or its components.
⚠
MAINTAIN EQUIPMENT IN OPTIMUM
CONDITION:
Confirm the aircraft and all
components are functioning correctly and are
free from damage. Key components include the
remote controller, compass, propulsion system,
radar modules, and spraying system.
⚠
WARNING
OPERATIONAL SAFETY:
01. Port Usage: Ports on the remote controller must be
used strictly in accordance with their designated
specifications.
02. Internet Connectivity: Regular internet access, via
WI-FI or a SIM card, is mandatory for the remote
controller. Failure to maintain this connection may
result in XAG being unable to provide warranty
repair services, and any resultant losses will not
be the responsibility of XAG.
03. Joystick Protocols: Under no circumstances
should the joysticks be activated to start the
motors when the aircraft is airborne.
⚠
WARNING
Remote Controller
PHYSICAL INTEGRITY:
01. Charging Precautions: Ensure the remote
controller is sufficiently charged prior to each
flight. Any exposure to moisture, especially during
charging, is strictly prohibited.
02. Antenna Positioning: Antennas must be correctly
positioned for optimal data transmission. Ensure
no obstructions block or cover the folding
antennas or the external GNSS antenna.
03. Handling & Storage: The remote controller must
always be held by the pilot and should never be
placed on objects for transmission. Store in a
location free from potential damage.
Ⓝ
Notes
OPTIMAL USAGE:
01. Data Transmission: Prior to take-off, ensure your
phone is connected to the remote controller’s WI-
FI.
02. Transmission Quality: Utilize the XAG One APP to
select the ideal transmission channel based on
the environment. Adjust the antenna's position
or relocate to an obstruction-free environment if
signal strength weakens.
03. Replacement Protocols: When utilizing a
replacement remote controller, it must be linked to
the aircraft and tested for a minimum transmission
distance of 400 m.
04. Battery Maintenance: The internal batteries of the
remote controller should be fully charged at least
once every three months. If a triple-beeping sound
is detected, immediate charging is required.
Batteries should be charged promptly if they
reach 0% to prevent over-discharge damage.
To Next Page
Loading...
