vii
Important Safety Information
General Precautions
1. Before installing and using the inverter, read all
appropriate sections of this guide and any cautionary
markings on the inverter and the batteries.
2. Do not operate the inverter if it has received a sharp
blow, been dropped, or otherwise damaged. If the unit is
damaged, see “Warranty” on page 42 and “Return
Material Authorization Policy” on page 43.
3. Do not dismantle the inverter; it contains no user
serviceable parts. Attempting to service the unit yourself
could cause electrical shock or fire.
Internal capacitors
remain charged after all power is disconnected.
See
page 43 for instructions on obtaining service.
4. To reduce the risk of electrical shock, disconnect both
AC and DC power from the inverter before working on
any circuits connected to the inverter. Turning off the
front panel On/Off will not reduce this risk.
5. Protect the inverter from rain, snow, spray, and bilge
water.
6. To reduce the risk of overheating or fire, keep the
ventilation openings clear, and do not install the inverter
in a zero-clearance compartment.
WARNING
Before installing and using your PROwatt
™
600
Inverter, read and save these safety instructions.
To Next Page
Loading...
Need help?
General