Need help?Do you have a question about the Xantrex GT2.8-AU-QC-230 and is the answer not in the manual?
General| Model | GT2.8-AU-QC-230 |
|---|---|
| Category | Inverter |
| Type | Grid-tie |
| Rated Power | 2.8 kW |
| Output Voltage | 230 V |
| Efficiency | 95.5% |
| Maximum Input Current | 14 A |
| Number of MPP Trackers | 1 |
| Cooling | Convection |
| Operating Temperature Range | -25°C to +60°C |
Provides comprehensive instructions for physically mounting the GT Inverter unit and its bracket.
Instructions for connecting the DC power cables from the PV array to the inverter, including fuse details.
Guidance for wiring multiple GT Inverters together for system operation, emphasizing correct connections.
Instructions for connecting the AC power cables from the inverter to the utility grid for both models.
Explains how to wire multiple inverters for system communication using Xanbus technology.
Step-by-step process for wiring and powering up each GT Inverter in an installation.
Procedure to verify the inverter's anti-islanding protection by testing grid disconnect functionality.
Guides users in identifying and resolving error/fault messages displayed by the inverter.
Details input/output parameters, protection settings, and power derating curves.
To Next Page