Need help?Do you have a question about the Xantrex GT5.0-AU-QC-230 and is the answer not in the manual?
General| Input Voltage Range | 200-550 V |
|---|---|
| Output Voltage | 230 V |
| Maximum AC Output Current | 21.7 A |
| AC Voltage | 230 V |
| AC Frequency | 50 Hz |
| Efficiency | 96.2% (Maximum) |
| Weight | 25 kg (55.1 lbs) |
| Dimensions | 500 x 350 x 185 mm (19.7 x 13.8 x 7.3 in) |
| Frequency | 50 Hz |
| Model | GT5.0-AU-QC-230 |
| Rated Power | 5.0 kW |
| Nominal AC Output Power | 5000 W |
| Protection | Over/Under Voltage, Over/Under Frequency, Anti-Islanding, Over Current, Short Circuit, Over Temperature |
| Operating Temperature | -25°C to +60°C |
| Cooling | Fan |
Provides safety guidelines, planning, setup, installation, operation, and troubleshooting.
Identifies who the manual is intended for, operators and qualified installers.
Emphasizes the importance of reading and retaining the manual for future reference.
Specifies that the inverter should not be used with life support or medical equipment.
Details the standards and certifications the GT Inverter complies with.
Explains the inverter's ground fault detection circuit and its function.
Explains what the GT Inverter is and its basic function.
Lists the key features and capabilities of the GT Inverter.
Describes different ways the GT Inverter can be installed, single or multiple units.
Covers essential considerations before proceeding with the installation process.
Outlines the procedures and requirements for physically mounting the inverter.
Provides instructions for making the necessary DC electrical connections to the inverter.
Provides instructions for making the necessary AC electrical connections to the inverter.
Instructions for wiring systems with more than one GT Inverter.
Step-by-step guide for commissioning the GT Inverter after installation.
Describes how to perform a disconnect test to ensure safety and proper operation.
Explains how to monitor the inverter's status via its front panel display.
Details the various screens shown on the front panel display and their meanings.
Explains the function of the LED status indicators on the inverter.
Discusses various factors that can impact the inverter's power output.
Provides routines for maintaining the inverter and ensuring optimal performance.
Guides on identifying and resolving error or fault conditions.
Details the electrical parameters and ratings of the inverter.
Lists the environmental operating conditions and ratings.
Provides the physical dimensions and weight of the inverter.
Details what the warranty covers, for how long, and Xantrex's responsibilities.
Details the policy and procedures for returning products for service.
Prompts users to record system information for warranty and service.
To Next Page