Need help?Do you have a question about the Xantrex RS3000 and is the answer not in the manual?
General| Model | RS3000 |
|---|---|
| Output Power | 3000 W |
| Input Voltage | 12 VDC |
| Output Voltage | 120 VAC |
| Output Waveform | Modified Sine Wave |
| Efficiency | 90% |
| Surge Rating | 6000 W |
| Output Frequency | 60 Hz |
| Continuous Output Power | 3000 W |
| Surge Power | 6000 W |
Operation Guide for the RS3000 Sine Wave Inverter/Charger.
Model designation for the Sine Wave Inverter/Charger.
Manual detailing the operation of the RS3000 unit.
Instruction to read and keep safety instructions.
Specific warning about critical risks.
General warnings identifying conditions leading to injury or death.
Safety precautions related to explosive gases from batteries.
Warning about the dangers of explosive gases.
Safety measures for handling batteries.
Explains the operational principles of the RS3000.
Details the inversion function of the RS3000.
Details the charging capabilities of the RS3000.
Explains the optimized charging algorithms for different battery types.
Procedure for manual equalization of flooded batteries.
Features for managing AC loads based on available power.
Features that ensure safe operation through electronic protection.
Description of the physical features on the front panel.
Detailed explanation of front panel indicators and controls.
Description of the physical features on the side panels.
Function of the sensor for accurate temperature-compensated charging.
Critical warning about product usage limitations.
Instructions for operating the unit using the System Control Panel.
Detailed guide to using the System Control Panel interface.
Guide to operating the unit in inverter mode.
Details the operational boundaries for the inverter.
Instructions for operating the unit in charger mode.
Warning about explosive gases during charging.
How the battery temperature sensor affects charging.
Procedure for operating the unit in equalization mode.
Warning about explosive gases during equalization.
Warning about potential damage to certain battery types.
Details the operational boundaries for the charger.
Overview of the different operating modes for the system.
Steps to modify device settings.
Access to detailed inverter and charger configuration settings.
Settings for configuring AC input voltage and frequency limits.
Critical safety warning about unit servicing.
Explains how faults and warnings are displayed and handled.
Classification of fault messages (automatic, manual, escalating).
Classification of warning messages (automatic, manual).
Overview of troubleshooting sections and their page numbers.
Step-by-step approach to identifying and resolving problems.
Details on viewing and understanding warning messages.
Details on viewing and understanding fault messages.
Detailed electrical specifications for the inverter function.
Detailed electrical specifications for the charger function.
Specifications related to AC transfer and general operation.
Environmental operating conditions and limits.
How ambient temperature affects inverter output power.
Explanation of the charging formulas used by the RS3000.
Guide to selecting the correct battery type for charging.
Description of the three-stage charging process.
Explanation of the manual equalization charge process.
Details of the limited warranty provided by Xantrex.
Important limitations on the product's intended use.
To Next Page
