Operation
975-0170-01-01 2–15
System Modes
This section provides an overview of the four different system modes.
The system modes described in this section affect the performance and
behavior of the RS3000 and all other Xanbus-enabled devices on the
Xanbus system. You’ll have to change the system mode when travelling,
putting your vehicle in storage, or when installing a Xanbus-enabled
device.
You can change system modes using the System Settings menu on the
System Control Panel.
You can also use the red System button on the System Control Panel to
put the System Control Panel and all other Xanbus-enabled devices into
Power Save mode only.
System modes are changed using the System Settings menu. The four
system modes are:
• Operating
• Power Save
•Safe
• Hibernate
Please read the section about each system mode to find out which mode is
appropriate for different conditions or situations.
Figure 2-3
System Control Panel
button
System
To Next Page
Loading...
Need help?
General