Configuration
3–8 975-0170-01-01
Selecting and Adjusting the Configurable Settings
You can view or change RS3000 settings from the RS3000 menu. Status
information is not configurable. Configurable settings are indicated by
square brackets [ ] and can be adjusted.
Follow these steps to change any RS3000 setting.
1. On the RS3000 menu, use the up arrow or down arrow button to
highlight the setting you want to change.
2. Press Enter to highlight the value of that Configurable setting,
indicated by square brackets [ ].
The previously set value appears with an asterisk beside it, as shown
in Figure 3-4.
3. Use the up arrow or down arrow button to change the value. Holding
down a button lets you scroll through values quickly.
4. Press Enter to select the value.
5. If you have another setting to change, return to step 1.
Or
If you have no more settings to change, press Exit to return to the
Select Device menu.
Selecting the Default Settings
All configurable items on the RS3000 menu items have a default setting.
The default setting is the value which was set at the time the unit was
originally installed.
You can restore individual settings to their default value or you can
restore all values to default settings. See “Restore Defaults Warning” on
page 3–29.
To Next Page
Loading...
Need help?
General