Xantrex 817-1000 User Manual

TM
TM
Freedom X Series Inverter
Owner’s Guide
817-1000
817-2000
Product Part Numbers
Freedom X Series INV Owners Guide.book Page i Tuesday, June 27, 2017 4:10 PM

Xantrex 817-1000 Specifications

General

Brand	Xantrex
Model	817-1000
Category	Inverter
Language	English

Summary

Important Safety Instructions

Safety Alert Symbol

Explains the safety alert symbol and its purpose for potential hazards.

Hazard Definitions

Defines DANGER, WARNING, CAUTION, and NOTICE levels for potential hazards.

Safety Instructions

Before You Begin the Installation

Advises reading the installation section, gathering tools, and reviewing safety instructions.

Installation Codes

Lists governing installation codes like NEC, CEC, CSA, and ABYC.

Basic Installation Procedures

Designing the Installation

Guides on planning the installation, showing typical components and relationships.

Choosing a Location for the Unit

Provides requirements for selecting a suitable installation location.

Mounting the Unit

Details the process and approved orientations for mounting the inverter.

Connecting the AC Input Wires

Explains how to connect the AC input wiring to the unit.

Connecting AC Output to an Existing AC Circuit

Guides on connecting the AC output to an existing circuit.

Connecting the DC Cables

Details the procedure for connecting the DC cables from the battery.

Connecting to ACC Signal

Explains how to wire the inverter for vehicle ignition control.

Connecting to a Remote Panel

Instructs on connecting the optional remote panel to the unit.

Testing Your Installation

Outlines tests to verify the installation in battery and grid modes.

Testing in Grid Mode

Explains how to test the inverter's performance in shore power mode.

Marine Installation

Inverter Operation

Adjusting Feature Settings in Configuration Mode

Settings Overview

Changing Default Values

Operating in Battery Mode

Turning Inverter Operation ON and OFF

Power Save Timer

Checking Battery Status

Checking Output Power

Operating Several Loads at Once

Turning the Audible Alarm ON or OFF

To manually reset the alarm

Operating During Transition Between Grid Mode and Battery Mode

Transitioning from Grid Mode to Battery Mode

Transitioning from Battery Mode to Grid Mode

Operating Limits

Power Output

Input Voltage

Overload Conditions

Overload Warning

Overload Shutdown

High Surge Loads

Troubleshooting

Troubleshooting Steps

Guides users on narrowing down problems before contacting support.

Warning Messages

Error Codes Displayed on the LCD Screen

Lists error codes, conditions, modes, and actions for system alerts.

Troubleshooting Reference

Alarm Issues

No Output Voltage

Fan Operation

Inverter Applications

Resistive Loads

Motor Loads