Do you have a question about the Xantrex XHR 150-7 and is the answer not in the manual?
Output Voltage | 0-150 V |
---|---|
Output Current | 0-7 A |
Input Voltage | 100-240 VAC |
Frequency | 47-63 Hz |
Efficiency | 85% typical |
Output Power | 1050 W |
Cooling | Forced air |
Operating Temperature | 0 to 40°C |
Details the limited warranty's scope, duration, Xantrex's service actions, and contact methods.
Highlights critical safety warnings, limitations on use, and general precautions for the power supply.
Introduces the manual, identifies the intended user, and lists revisions.
Defines and illustrates standard safety markings and symbols found on the unit.
Overview of the 1000W DC power supplies and their typical uses in testing and development.
Lists features, options, and describes front panel controls, indicators, and meters.
Details rear panel connectors, SW1 switch, and J2 connector functions for programming.
Presents detailed electrical parameters, environmental specs, and physical dimensions.
Step-by-step guide for initial installation, inspection, cleaning, and return procedures.
Guidelines for rack mounting, ensuring airflow, and connecting AC power safely.
Procedures for functional tests, load connections, and wiring recommendations.
Guidance on setting up local and remote sensing for optimal load regulation.
Explains constant voltage/current modes and automatic crossover behavior.
Methods for series, parallel, and split supply operation to increase voltage or current.
Details on setting, checking, and resetting Over Voltage Protection and Over Temperature Protection.
Operation of the shutdown function and user-level troubleshooting guides.
Controlling output voltage/current via external analog sources using J2 connector.
Using rear panel signals for monitoring and details on the optional ISOL interface.
Lists requirements, precautions, and procedures for front panel calibration (volt, amp, OVP).
Steps to calibrate programming circuits and output monitor circuits for accuracy.