Need help?Do you have a question about the Xantrex XHR 40-25 and is the answer not in the manual?
General| Brand | Xantrex |
|---|---|
| Model | XHR 40-25 |
| Category | Power Supply |
| Language | English |
Details the scope of the limited warranty and its 5-year duration for XHR 1000 Watt Series DC Power Supplies.
Outlines what is not covered by the limited warranty, including misuse, neglect, and unauthorized modifications.
Defines warning and caution symbols and provides critical safety information for operating power supplies.
Describes the manual's purpose, target audience, and intended use for operating XHR Series DC Power Supplies.
Provides a general description of the 1000 watt DC output power supplies and lists their key features and options.
Details the SW1 Programming Switch and J2 Programming Connector on the rear panel for controlling supply functions.
Presents detailed electrical performance data for various XHR models, including voltage, current, and ripple.
Covers the physical attributes of the power supply, including controls, connectors, size, and weight.
Provides a step-by-step guide for the initial setup and connection of the power supply.
Details the process for returning power supplies for service, including RMA procedures and packaging.
Explains the AC input requirements, voltage range, power factor, and AC fail indicator.
Outlines procedures for verifying power supply operation, including power-on and mode checks.
Recommends methods for connecting loads to the power supply, covering wiring and configurations.
Explains how to set up local and remote sensing for output voltage regulation.
Describes Constant Voltage and Constant Current modes and automatic crossover.
Guides users on setting output voltage and current limits using front panel controls.
Details how to connect multiple supplies in series, parallel, or split configurations for increased voltage or current.
Explains the OVP circuit's function, front panel operation, and how to set and reset trip levels.
Provides guidance on operator-level checks for diagnosing unusual operation or problems.
Covers controlling output voltage and current limit using external analog sources via the rear panel connector.
Provides a step-by-step guide for setting up and performing remote analog programming.
Explains how to use readback signals for remote monitoring of output voltage and current.
Describes the optional ISOL interface for isolated analog programming and readback.
Details the necessary environment, precautions, and equipment for calibrating the power supply.
Guides users through calibrating front panel meters, preview functions, and OVP setpoints.
Covers the specific calibration steps for the ammeter and Over Voltage Protection circuits.
Explains how to calibrate the output voltage and current monitor circuits for accurate readback.
To Next Page