Need help?Do you have a question about the Xantrex XW4548-120/240-60 and is the answer not in the manual?
General| Model | XW4548-120/240-60 |
|---|---|
| Input Voltage | 48 VDC |
| Output Voltage | 120/240 VAC |
| Output Power (Continuous) | 4500 W |
| Surge Power | 9000 W |
| Frequency | 60 Hz |
| Operating Temperature | -40°C to 60°C |
| Total Harmonic Distortion (THD) | < 5% |
| Type | Inverter |
| Battery Voltage Range | 40-64 VDC |
| Transfer Time | 16ms |
| Cooling | Fan Cooled |
| Protections | Overload, Over temperature, Short circuit |
Overview of the XW Power System's components and applications.
Detailed description of XW Inverter/Charger, Conduit Box, and other accessories.
Read instructions, select location, prepare knockouts, and install air filter.
Instructions for installing mounting plates, inverters, and distribution panels.
Procedures for making AC, DC, and communication connections for the inverter.
Explains Xanbus-enabled devices, system overview, and network components.
Covers ordering components, network layout, and installation guidelines.
Guidelines for PV array selection, MPPT voltage, and controller mounting.
Details on grounding, fault protection, wire sizing, and connections.
Steps for initial setup and configuration of the charge controller.
Guide for mounting, connecting, and verifying the XW System Control Panel.
Steps for installing the AGS, including mounting, wiring, and network connection.
To Next Page